COMPOSITION
Mineral paint based on stabilized potassium silicate dispersion, reinforced with EPH DRY TECHNOLOGY, which is a water-repellent compound based on silicon particles. |
Properties
- Mineral matte surface with high adhesion.
- Anti-mold.
- Breathable to water vapor and highly permeable to CO2.
- Does not form a film.
- Reacts insolubly with the substrate, consolidating it completely through micro-silicification.
- Reduced tendency to get dirty and high resistance to the passage of time. Fire-retardant, anti-static, non-thermoplastic.
- High resistance to UV rays, industrial gas emissions, and acid rain.
- Impermeable to rainwater, even a few hours after application.
- Ecological due to its properties and composition.
- No added solvents.
- Applicable on all mineral substrates.
Application
- 100% natural, breathable, and odorless paint, ideal for walls and ceilings both indoors and outdoors.
How to Use
- Work in full sections and from wet to wet (this point is very important for intense colored silicate paints).
- Working with two people is advisable: one person loads the surface to be painted with paint using a roller, and the other, before the paint dries (approximately two minutes), smooths it with another roller, avoiding leaving an excessive layer of paint.
- For correct application, it is essential to thoroughly smooth the paint, distributing it perfectly over the surface without leaving an excessively loaded layer.
- Apply the paint from bottom to top to avoid drips.
- Apply with a wide brush (similar to those used in the past for whitewashing), a short-haired cotton roller, or an airless spray gun.