Pavex 3C Mortar -

Solvent-free 3-component epoxy grout mortar for screeds, leveling, filling and anchoring.

On a completely dry and moisture-free surface, clean and free of greases and other materials.
Do not apply with relative humidity greater than 85% and ambient temperature below 5oC.
Maximum support humidity 4%.
Apply with good air renewal, 100% solvent-free solids.
On completely set cement (≥ 28 days).
On smooth, non-absorbent surfaces, open pore by mechanical means (abrasive blasting, fratasing, abrasive disc) accompanied by deep aspiration.
If necessary, to ensure perfect adhesion, previously apply a layer of Primer Pavex-2C primer with moisture support <4%.
Increases hardness and resistance against abrasion.

Mix the components A + B with a whisk at low revolutions for at least 2 minutes until a uniform mixture is obtained, then add the component C and mix until a homogeneous mortar is achieved.
Mix life: ±15 minutes
Drying at and relative humidity 60%20oC
Drying to the touch: ≥60 min.
Total drying: 8-12 hours
Total polymerization: ≥7 days
Final appearance: Mortar

Leveling epoxy mortar for anchoring and filling under plates