• Español
  • English
  • Français
  • Español width=
  • COLORED FLUID CONCRETE
    WITH AGGREGATES

    STYLFLOOR industrial®

    DESCRIPTION

    COMPOSITION

    Marble aggregates, glass , cement, fibers, organic additives.

    Observations

    Do not apply:
    • With ambient humidity >85%, with direct insolation and
    extreme temperatures.
    • In different thicknesses.
    • Over fresh resistance concrete < 250 kg/cm2.
    • Over wet floors subjected to continuous humidity rising
    • Over mortars calcium sulfate and lime base.

    Execution Conditions

    • The support in order to receive the concrete has to
    be solid and hard, dry, without dust, degrading zones,
    painting, oils…
    • The fresh concrete has to have a good flatness and has
    to be without water and slag raise… by capillarity …
    • Spilt of Stylfloor industrial over fresh concrete with
    resistance: ≥ 250 kg/cm 2 .
    • Avoid the fresh concrete spilt with ponded water.
    • Do not proceed the spilt over fresh concrete with
    excess of additives, fluid agents …
    • Avoid coating application with low temperatures, direct
    insolation, strong wind, humidity, rain or frost possibility.
    • Dispose always from awnings if it is necessary in the
    event of rain or direct insolation.
    • Respect the expansion joints, work joints, through a cut
    or profile placement (maximum panels, 16-20 m 2 ).

    ¿Quieres más información?

    Si deseas más información sobre nuestros producto contacta con nosotros

    Nombre(Required)